Back Pain

Low Back Pain ICD-10 Codes: M54.50, M54.16 & Sciatica Codes

HealthEH Team
By HealthEH Team Nov 18, 2026 • 27 min read
Low Back Pain ICD-10 Codes: M54.50, M54.16 & Sciatica Codes

The ICD-10 code for low back pain is M54.50 (low back pain, unspecified). It is the default code when the provider documents low back pain without identifying a specific cause. Two related codes cover the cases where more is known: M54.51 for vertebrogenic low back pain, when imaging shows vertebral endplate changes, and M54.59 for other specified low back pain, when the cause is documented but has no code of its own. The old single code M54.5 has not been billable since October 1, 2021.

That three-way split is only the starting point. When pain shoots down the leg, a nerve root is involved, or imaging confirms a disc problem, stenosis or a slipped vertebra, a different and more specific code applies, and payers expect it. This guide lists every low back pain ICD-10 code you are likely to need, explains how to choose between the ones coders confuse most, and flags the retired codes and combinations that still trigger denials.

What Is the ICD-10 Code for Low Back Pain?

Low back pain lives in the ICD-10-CM category M54 (Dorsalgia), the family of codes for pain in the spine. Before October 2021, a single code, M54.5, covered all low back pain. The Centers for Medicare and Medicaid Services (CMS) retired M54.5 as a billable code on October 1, 2021, and replaced it with three specific codes that require a fifth character:

  • M54.50 — Low back pain, unspecified. Use it when the record says low back pain or lumbago and nothing more. It also covers loin pain and lumbago NOS (not otherwise specified). It fits a first visit, a referral that only says “low back pain”, or any encounter where the cause has not yet been identified.
  • M54.51 — Vertebrogenic low back pain. Use it only when the provider documents pain coming from the vertebral endplates, usually with MRI evidence of Modic type 1 or type 2 changes. It was created largely to support coverage of basivertebral nerve ablation, so payers look for the imaging and the documented link.
  • M54.59 — Other low back pain. Use it when the pain has been characterized, for example mechanical low back pain, muscular pain or facet-mediated pain, but no more specific code describes it. Before using it, check that a strain, sciatica or disc code does not fit better.

None of the three M54.5x codes carries laterality: there is no left or right version of low back pain itself. Laterality enters the picture only when the pain radiates, which is covered by the sciatica and radiculopathy codes below. The three codes are unchanged in the FY2027 ICD-10-CM edition, effective October 1, 2026.

– ADVERTISEMENT –

Low Back Pain ICD-10 Codes: The Complete Table

This master table covers the codes used for low back pain and the conditions that most often cause it. All of the codes in the table are billable as listed, provided the documentation supports them.

Code Description Use when
M54.50Low back pain, unspecifiedCause not documented; first visit or referral with no detail
M54.51Vertebrogenic low back painImaging shows vertebral endplate (Modic) changes linked to the pain
M54.59Other low back painDocumented cause or type with no more specific code
M54.40Lumbago with sciatica, unspecified sideBack pain plus sciatic leg pain, side not documented
M54.41Lumbago with sciatica, right sideBack pain plus sciatic pain down the right leg
M54.42Lumbago with sciatica, left sideBack pain plus sciatic pain down the left leg
M54.30Sciatica, unspecified sideSciatic leg pain without low back pain, side not documented
M54.31Sciatica, right sideSciatic leg pain on the right, without low back pain
M54.32Sciatica, left sideSciatic leg pain on the left, without low back pain
M54.16Radiculopathy, lumbar regionNerve root symptoms in the lumbar region, no disc cause coded
M54.17Radiculopathy, lumbosacral regionNerve root symptoms at the lumbosacral junction (L5-S1)
M51.16Intervertebral disc disorders with radiculopathy, lumbar regionDisc disorder documented as the cause of the radiculopathy
M51.26Other intervertebral disc displacement, lumbar regionDisc displacement with back pain but without radiculopathy
M51.360Intervertebral disc degeneration, lumbar region, discogenic back pain onlyDegeneration causing back pain only (sixth character 0)
M51.362Intervertebral disc degeneration, lumbar region, discogenic back pain and lower extremity painDegeneration causing back pain and leg pain (sixth character 2)
M43.16Spondylolisthesis, lumbar regionOne lumbar vertebra slipped forward over the one below
M48.061Spinal stenosis, lumbar region without neurogenic claudicationNarrowed lumbar canal, no walking-induced leg pain documented
M48.062Spinal stenosis, lumbar region with neurogenic claudicationNarrowed lumbar canal with leg pain on walking, relieved by sitting
M47.816Other spondylosis without myelopathy or radiculopathy, lumbar regionDegenerative (arthritic) lumbar spine changes, no nerve involvement
S39.012AStrain of muscle, fascia and tendon of lower back, initial encounterAcute low back strain from an injury, first visit (7th character A)
Median sagittal section of two lumbar vertebrae and their ligaments, from Gray's Anatomy
The five lumbar vertebrae (L1-L5) sit between the rib cage and the sacrum. Most low back pain codes describe problems in this region. Image: Henry Gray, Anatomy of the Human Body (1918), public domain via Wikimedia Commons.

Two add-on codes often travel with the ones above. G89.29 (other chronic pain) and G89.4 (chronic pain syndrome) are added when chronic pain itself is being treated, and M99.03 (segmental and somatic dysfunction of the lumbar region) is the code Medicare expects alongside a supporting diagnosis on chiropractic claims. Z98.1 (arthrodesis status) records a prior spinal fusion. None of these replaces the low back pain code itself.

How to Choose the Right Code in 4 Steps

Most coding errors with low back pain come from stopping at the first code that looks right. Four questions, asked in order, get you to the most specific code the record supports.

Step 1: Is there a confirmed structural diagnosis? If imaging or examination confirms a disc disorder, spinal stenosis, spondylolisthesis or spondylosis as the cause, code that condition first. ICD-10-CM guidelines say signs and symptoms routinely associated with a confirmed diagnosis should not be coded separately, so the pain code is usually left off. If no structural cause is confirmed, stay in the M54.5x family.

Step 2: Does the pain stay in the back, or does it travel down the leg? Pain confined to the lower back points to M54.50, M54.51 or M54.59. Pain that radiates down the leg moves you into the sciatica family: M54.40, M54.41 or M54.42 when the back pain and the leg pain are both present, or M54.30, M54.31 or M54.32 when the leg pain stands alone.

Step 3: Are there nerve-root signs? Dermatomal pain, numbness, tingling, weakness or a positive straight-leg raise test means a nerve root is involved, and that calls for a radiculopathy code rather than a pain code. The key distinction is the cause: M54.16 when the radiculopathy has no disc cause coded, M51.16 when a disc disorder is documented as the cause.

Step 4: Is the side documented? The sciatica codes (M54.3x) and lumbago-with-sciatica codes (M54.4x) require laterality. If the note says right leg, use M54.41 or M54.31; left leg, M54.42 or M54.32. If the side is not documented, use the unspecified code (M54.40 or M54.30) and consider querying the provider, since unspecified codes draw more payer scrutiny.

The three codes coders confuse most

Code What it means Use it when
M54.16Radiculopathy, lumbar regionNerve root symptoms, cause not linked to a disc (for example diabetic or idiopathic radiculopathy)
M51.16Disc disorder with radiculopathy, lumbarA disc disorder is documented as the cause of the nerve symptoms
M54.41Lumbago with sciatica, right sideBack pain plus sciatic pain down the right leg, without a coded disc or nerve-root diagnosis

Worked example 1: “Acute low back pain after lifting, no radiation.” Code M54.50, or S39.012A if the provider documents a muscle strain. There is no leg pain and no nerve involvement, so no sciatica or radiculopathy code applies.

Worked example 2: “Low back pain radiating down the left leg below the knee, sciatica.” Code M54.42 (lumbago with sciatica, left side). Do not add M54.50 on top: the Excludes1 rules forbid reporting low back pain codes together with lumbago-with-sciatica codes.

Worked example 3: “L4-L5 disc herniation on MRI causing right leg pain and numbness.” Code M51.16 (disc disorder with radiculopathy, lumbar). Do not add M54.16 for the same radiculopathy: the disc code already describes it.

– ADVERTISEMENT –

M54.50 vs M54.51 vs M54.59: Which One Fits?

The three codes that replaced M54.5 look similar, but they describe different clinical situations, and payers treat them differently.

M54.50 (low back pain, unspecified) is the workhorse. It is appropriate for a first visit, before imaging, or whenever the note documents low back pain without characterizing it further. It is valid and billable, but it is also the code payers scrutinize most, especially when it appears alone on a long plan of care or an expensive service such as an MRI or an epidural injection. If the evaluation finds a more specific cause, update the diagnosis rather than carrying M54.50 forward visit after visit.

M54.51 (vertebrogenic low back pain) is the narrowest of the three. The pain must come from the vertebral endplates, and the record should show MRI evidence of Modic changes with a documented link between those changes and the pain. Do not use it simply because the pain is in the lumbar spine. Because the code supports coverage of basivertebral nerve ablation (CPT 64628 and 64629), payers check the documentation behind it closely.

M54.59 (other low back pain) covers pain that has been characterized but has no code of its own, such as mechanical low back pain, muscular or soft-tissue pain, or facet-mediated pain. The trap is using it as a default when a more specific code exists: if the note supports a strain (S39.012-), sciatica (M54.3-) or a disc condition (M51.-), use that code instead.

Code Documentation needed Watch out for
M54.50Low back pain, no cause statedPayers question it alone on MRIs, injections and long therapy courses
M54.51MRI Modic changes plus a documented endplate linkDo not use without imaging support
M54.59A characterized cause with no specific codeCheck strain, sciatica and disc codes first

Sciatica and Radiculopathy Codes: M54.16, M54.30 and M54.41

Sciatica and radiculopathy are often used as if they were the same thing. In ICD-10-CM they are not. Sciatica describes a pattern of pain travelling along the sciatic nerve, from the buttock down the back of the thigh and calf. Radiculopathy describes a nerve root that is compressed or irritated, producing pain, numbness or weakness in a dermatomal pattern. A patient can have sciatica without a documented radiculopathy, and radiculopathy can exist without the classic sciatic distribution.

That distinction drives the code choice. M54.30, M54.31 and M54.32 (sciatica) are used when the leg pain follows the sciatic nerve and there is no low back pain to code alongside it. M54.40, M54.41 and M54.42 (lumbago with sciatica) are used when back pain and sciatic leg pain are both present. Pick one family or the other, never both: the two describe the same presentation with and without the back component.

M54.16 (radiculopathy, lumbar region) applies when nerve-root involvement is documented, for example dermatomal pain, sensory loss, weakness, reflex changes or a positive straight-leg raise test, and no disc disorder is coded as the cause. If a disc disorder is the documented cause of the same nerve symptoms, the correct code is M51.16 instead, and M54.16 is not added. For symptoms at the L5-S1 junction, use M54.17 (lumbosacral region) rather than M54.16.

One common error is coding sciatica and radiculopathy together for the same leg. If the provider documents radiculopathy, that is the more specific description of the nerve involvement, and the sciatica code is usually left off. When the documentation is genuinely unclear, query the provider rather than stacking both codes and hoping the payer sorts it out.

– ADVERTISEMENT –

Disc, Stenosis and Spondylolisthesis Codes

When imaging confirms a structural cause, the code moves from the symptom (pain) to the condition itself. Four families cover most cases.

Disc disorders (M51.-). The pair coders mix up most is M51.16 and M51.26. M51.16 means an intervertebral disc disorder with radiculopathy in the lumbar region: the disc is documented as the cause of the nerve symptoms. M51.26 means other intervertebral disc displacement in the lumbar region, and it is used when a disc has displaced but there is no radiculopathy, for example disc displacement with lumbago only. Using M51.26 when the patient has radiculopathy, or M51.16 when there is none, is one of the most frequent disc-coding mistakes.

Disc degeneration has its own sixth-character system since October 1, 2024. The old codes M51.36 (lumbar) and M51.37 (lumbosacral) became non-billable category headers. The replacement codes say what kind of pain the degeneration is causing: M51.360 for discogenic back pain only, M51.361 for lower extremity pain only, M51.362 for back pain and lower extremity pain together, and M51.369 when no pain is mentioned. Because the pain is built into these codes, no separate low back pain or sciatica code is added to describe it, and the Excludes1 notes forbid exactly those combinations.

Medical illustration of a herniated lumbar disc pressing on a spinal nerve root
A herniated lumbar disc can press on a nerve root and cause radiculopathy. When a disc is documented as the cause, code M51.16, not M54.16. Image: Bruce Blaus, Blausen Medical, CC BY 3.0 via Wikimedia Commons.

Spinal stenosis (M48.06-). Lumbar spinal stenosis is coded M48.061 when neurogenic claudication is not documented and M48.062 when it is. Neurogenic claudication means leg pain, cramping or weakness brought on by walking or standing and relieved by sitting or bending forward. Imaging alone showing a narrowed canal does not establish claudication: the symptoms must be in the clinical record. The parent code M48.06 has been non-billable since October 1, 2017.

Spondylolisthesis (M43.16). This is the forward slip of one lumbar vertebra over the one below it, most often at L4-L5 or L5-S1. The ICD-10 code captures the region, not the vertebral level or the grade of the slip, so a slip at L3-L4 is still M43.16, while a slip at L5-S1 is M43.17 (lumbosacral). Grade (I-IV) should still be documented for surgical planning and payer review. When radiculopathy accompanies the slip, code both M43.16 and M54.16. If the spondylolisthesis is documented as congenital, use Q76.2 instead of M43.16.

Spondylosis (M47.816). This code means other spondylosis without myelopathy or radiculopathy in the lumbar region: degenerative arthritic changes, such as facet arthropathy and bone spurs, without nerve involvement. A warning for coders: at least one popular coding guide mislabels M47.816 as “spondylosis with radiculopathy”. The “with radiculopathy” description belongs to a different code family, so check the official description rather than a secondary summary before using it.

Retired Codes You Must Stop Using

Low back pain coding has changed three times in recent years, and old codes still sitting in EMR favorites, intake forms and saved plans of care are a steady source of denials. These are the retired codes to remove:

Retired code What it was Retired Use instead
M54.5Low back painOctober 1, 2021M54.50, M54.51 or M54.59
M48.06Spinal stenosis, lumbar regionOctober 1, 2017M48.061 or M48.062
M51.36Intervertebral disc degeneration, lumbarOctober 1, 2024M51.360, M51.361, M51.362 or M51.369
M51.37Intervertebral disc degeneration, lumbosacralOctober 1, 2024M51.370, M51.371, M51.372 or M51.379

Claims submitted with any of these parent codes are rejected automatically, because the codes are category headers, not billable diagnoses. The fix is mostly administrative: remove the retired codes from diagnosis favorites, intake forms and saved plans of care, and check that the billing system loads the current ICD-10-CM edition each October, when the code set changes. A short review by front desk, billing staff and clinicians every October prevents most avoidable denials.

Common Coding Mistakes That Get Claims Denied

1. Still using M54.5. The most common error in low back pain coding is also the oldest: M54.5 has not been billable since October 2021. Any claim carrying it is denied on arrival.

2. Coding the pain and the cause together. ICD-10-CM uses Excludes1 notes for code pairs that should never be reported together. Do not report M54.50, M54.51 or M54.59 alongside M54.4- (lumbago with sciatica), S39.012- (low back strain) or M51.360/M51.370 (disc degeneration with back pain only). Do not report M54.4- alongside M51.362/M51.372 (disc degeneration with back and leg pain). When two codes describe the same patient, pick the one that best matches the documented diagnosis.

3. Stacking M54.16 and M51.16 for the same radiculopathy. If a disc disorder is documented as the cause of the radiculopathy, M51.16 alone describes it. Adding M54.16 for the same nerve symptoms double-counts the condition.

4. Forgetting laterality. M54.41 and M54.42, and M54.31 and M54.32, differ only by side. An unspecified-side code (M54.40 or M54.30) on a claim where the record clearly states the side invites a denial or a request for more information.

5. Forgetting the seventh character on strain codes. S39.012 requires a seventh character: A for the initial encounter, D for a subsequent encounter, S for a sequela. A six-character S39.012 with no seventh character is incomplete and will not process.

6. Carrying an unspecified code through the whole plan of care. M54.50 is appropriate at the first visit, but payers flag it when it is the only diagnosis on a long course of therapy, an MRI without red flags, or an epidural injection. When the workup identifies a cause, update the diagnosis to the specific code.

Documentation Tips: What to Write So the Code Holds Up

A code is only as defensible as the note behind it. Payers deny low back pain claims most often not because the code is wrong, but because the documentation does not support it. A complete note records:

  • Location, laterality and radiation: where the pain is, which side, and whether it travels down the leg and how far.
  • Cause: injury, degeneration, stenosis or disc disease, when known.
  • Duration: acute or chronic, and how long the current episode has lasted.
  • Neurologic findings: weakness, reflex changes, sensory loss, or a positive straight-leg raise test.
  • Imaging findings: Modic changes, disc herniation, canal narrowing, or a vertebral slip, when they support a specific diagnosis.
  • Functional limitations: what the patient cannot do, such as sitting, standing, walking or lifting.
  • Response to prior treatment: what was tried, for how long, and whether it helped.

When the note is ambiguous, for example pain described as radiating without a side, or a possible disc problem without imaging, query the provider before coding rather than guessing. A one-line clarification at the time of the visit is far cheaper than a denied claim and an appeal.

Chronic Low Back Pain: How to Code It

ICD-10-CM has no single code for chronic low back pain. The correct approach is to code the type of low back pain first, usually M54.50 or M54.59, and add G89.29 (other chronic pain) when the documentation supports chronic pain and the encounter is for pain control or management. Use G89.4 (chronic pain syndrome) only when the provider documents chronic pain syndrome specifically: the two are not interchangeable.

Sequencing matters. Under the ICD-10-CM guidelines, a G89 code is listed first when the main reason for the visit is pain control or pain management. When the visit is for the underlying condition, the site code (M54.5-) goes first. Words such as “intractable” and “severe” do not have codes of their own: describe them in the documentation, but do not invent a code for them.

For patients whose pain has lasted more than 12 weeks, make sure the record states the duration and the functional impact explicitly. That documentation is what justifies both the chronic-pain add-on and continued treatment, and it is the first thing a payer reviewer looks for.

Conclusion

The ICD-10 code for low back pain is M54.50 in most cases, M54.51 when imaging shows a vertebrogenic source, and M54.59 when the cause is documented but has no code of its own. From there, the choice widens: sciatica and radiculopathy codes when pain travels down the leg, disc codes when a disc is the documented cause, stenosis and spondylolisthesis codes when imaging confirms them, and a chronic-pain add-on when pain management is the reason for the visit. The rule that ties it together is simple: code the most specific diagnosis the record supports, never code a symptom alongside the condition that causes it, and retire M54.5, M48.06 and M51.36/M51.37 from every template. Do that, and most low back pain claims go through the first time.

This article is for general information only and is not medical or coding advice. ICD-10-CM codes change every October, and coverage rules vary by payer. Verify every code against the current ICD-10-CM edition and your payer’s policies, and confirm coding decisions with a qualified coder or clinician.

– ADVERTISEMENT –

Frequently Asked Questions

What is the ICD-10 code for low back pain? +

The ICD-10 code for low back pain is M54.50 (low back pain, unspecified). Use M54.51 for vertebrogenic low back pain, when imaging shows vertebral endplate changes, or M54.59 for other low back pain, when the cause is documented but has no more specific code. Choose the one that matches the documented cause.

Is M54.5 still a valid ICD-10 code? +

No. M54.5 has not been billable since October 1, 2021. It is now a category header for M54.50, M54.51 and M54.59, and claims submitted with M54.5 alone are rejected. Use one of the three five-character codes instead.

What is the ICD-10 code for low back pain with sciatica? +

Use M54.41 for low back pain with sciatica on the right side, M54.42 for the left side, and M54.40 when the side is not documented. Do not add M54.50 on top of these codes: the Excludes1 rules forbid reporting low back pain codes together with lumbago-with-sciatica codes.

What is the difference between M54.16 and M51.16? +

M54.16 is radiculopathy in the lumbar region without a disc cause coded, for example when the nerve irritation comes from diabetes or another non-disc cause. M51.16 is an intervertebral disc disorder with radiculopathy in the lumbar region, used when a disc disorder is documented as the cause of the nerve symptoms. Use only one of them for the same radiculopathy.

What is the ICD-10 code for chronic low back pain? +

There is no single code for chronic low back pain. Code the type of low back pain, usually M54.50 or M54.59, and add G89.29 (other chronic pain) when the documentation supports chronic pain. Use G89.4 (chronic pain syndrome) only when the provider documents chronic pain syndrome. When pain management is the main reason for the visit, the G89 code is listed first.

Did the low back pain codes change in 2026 or 2027? +

No. M54.50, M54.51 and M54.59 are unchanged in the FY2027 ICD-10-CM edition, effective October 1, 2026. The most recent related change was the lumbar and lumbosacral disc degeneration codes (M51.36- and M51.37-) on October 1, 2024, which now require a sixth character describing the type of pain.

What is the ICD-10 code for lumbar spinal stenosis? +

Use M48.061 for spinal stenosis in the lumbar region without neurogenic claudication, and M48.062 when neurogenic claudication (leg pain on walking, relieved by sitting or bending forward) is documented. The parent code M48.06 has been non-billable since October 1, 2017, so one of the two subcodes is required.

Disclaimer: The information provided on this website is for educational and informational purposes only and does not constitute medical advice. Always consult with a qualified healthcare provider regarding any health concerns or before making any changes to your diet, medication, or lifestyle.